Windows

If you’re wondering how to clone hard disk on SSD, I could help you. After long patience, you have decided to replace the hard disk which is installed on your computer, laptop, notebook, iMac or Macbook.

Want to make the upgrade replacing it with an SSD from 2.5 “ or M2. You know that after doing the PC will go fast. The big problem, though, is that data, partitions, operating systems and drivers are stored in the old HDD. So, you have relied on the web looking for a solution and, fortunately, you’ve come here.

In the following guide, I’ll explain how to clone hard disk on SSD. I will tell you what you need to do to copy all the data contained in the HDD or Macintosh HD (if you have Mac) on your new 2.5-inch SSD. Do not worry, I know that you want to create a bootable SSD, so you can permanently replace the old hard drive. Trust me, you will see that at the end of this guide you will be satisfied.

I state that the procedure is valid for any hard disk and SSD type SATA III, SATA 6 and  M.2, 2.5 “ and 3.5 inches. It does not matter if they are produced by Samsung, Western Digital, Seagate, Apple, San Disk, Crucial or others. In addition, you can adapt the illustrated steps to any computer running Windows, Linux or MacOS. That said, if you agree, you just have to start.

How to clone hard disk on SSD

When one wonders how to clone hard disk on SSD, it can be solved in many ways. There are several cloning programs for Windows, MacOS and Linux, but most of them are chargeable. In this guide I recommend only one, quick and free, it’s called Clonezilla. Thanks to the block copy mechanism that it uses, cloning will be completed in a short time (variable based on the data contained in the hard disk). I can tell you that in half an hour, I loaded from hard disk to SSD the beauty of three operating systems in trial boot (including partitions) and about 250 GB of data. The result was perfect and I did not notice the change.

That said, here are the steps to clone hard disk on SSD. All you need to do is read and apply the procedures described.

Index

• Premise
• Required hardware
• Hard disk backup
• Creation of a Live of Clonezilla on USB
• Hard disk cloning on SSD
• Starting from SSD

Premise

Before revealing how to clone hard disk on SSD, I want to clarify that the local disks to be identical must be dismounted. For disassembled I mean not started, but equally turned on and connected to the computer.

In order for the copy to be identical, you must use a Clonezilla Live on a USB stick. In this way, hard drives and SSDs will not be started, but will be available as local disks.

Continuing the reading, you can understand how to create the Live of Clonezilla and how to use it to clone hard disk on SSD. Please do not put your old hard disk in until you are sure you have cloned the data to the solid state drive.

Required hardware

The first thing you need to do when you ask yourself how to clone hard disk on SSD is to find the necessary hardware. To perform the operation you need:

• SSD disk of SATA type 3 Gbps, SATA 6 Gbps, M.2 or another. The brand is indifferent. Among the best there are Samsung, Crucial, San Disk, Kingston and Corsair (and not only).
• 2.5 “external box or adapter cable to convert from moment SATA to USB 3.0 or from M2 to USB 3.0 the new SSD disk (just the time to clone it).
• Cross screwdriver and cutting
• Stronghold double-sided tape (only necessary for some iMac models that do not have a flap)
• Torx and Allen keys
• USB flash drive empty or to format

If you are not sure which type of SSD to buy, check the motherboard specifications before buying it. Based on those, proceed by choosing the fastest one for your computer.

Once you get the necessary hardware, you can proceed to clone hard disk on SSD. Now you do not really need anything else.

Hard disk backup

Another preliminary step that you have to implement when you ask yourself how to clone hard disk on SSD, is the backup of the HDD. While not deleting anything from the old hard drive, Clonezilla will manage its data during the cloning process. Therefore, if something went wrong or if the electricity went off, the data could become illegible in some way. To protect them, just make a backup to an external disk, a NAS, or another computer. In short, save your data elsewhere before doing something, in order to avoid problems.

Once this is done, simply create the USB stick with the Clonezilla live, proceed to clone hard disk on SSD and make the latter the main disk putting it in place of the other. By continuing to read, you can understand how it is done.

Creation of a Live of Clonezilla on USB

After reminding you to back up your old HDD, I can explain how to clone hard disk to SSD. First, Clonezilla is required to perform cloning. You have to mount the ISO or the ZIP package containing the Clonezilla Live on the USB stick. The ISO or ZIP file can be found at this address. Instead, to create the bootable USB stick, if you have Windows you could use LinuxLive USB Creator. Instead, if you have Mac or Linux, you must use a similar program, like Tuxboot.

After installing Clonezilla Live on the USB stick, you can finally use it to clone hard disk on SSD. Continue reading to understand how it is done.

Hard disk cloning on SSD

You have finally come to understand how to clone hard disk on SSD.

• After creating the USB stick with Clonezilla Live, turn off the computer and insert it into it. Then, connect the new SSD to the computer via USB  using the External Box.
• Then, if you have Windows, enter the BIOS and change the boot order by setting the USB stick first.
• If you have Mac, hold down the  Option (⌥) key during startup and select the USB drive.
• Instead, if you have Ubuntu, turn on your PC and when the Start menu appears, choose the USB stick.

In doing so, the Clonezilla Live will start.

• Choose  Other modes of Clonezilla Live and after Clonezilla live (To RAM Boot media can be removed later).
• Then, set the Language, select the keyboard layout and click Start Clonezilla.
• Now, choose the option disk_to_local_disk.
• In the mode local_disk_to_local_disk_clone, Clonezilla will clone hard disk on SSD.
• Proceed by selecting the source disk from the list , ie the old hard disk.
• It really paid attention to the letter sda, sdb or sdc and to the name of the local disk that appears next.
• Select the right one to avoid problems.
• Once this is done, set the Target Disk , which is the new SSD.
• Check again to have chosen the correct one and press Enter.
• Finally, start the cloning by writing y  and pressing Enter twice in a row.
• At this point, you just have to wait.
• At the end of the cloning, the SSD disk should have become the exact copy of the old hard disk. In fact, it should contain its data and its partitions.
• To find out, just start it (see below to learn more).

Starting from SSD

Now that you understand how to clone hard disk on SSD and you did it, try to start it. To give it a try, boot from SSD on an external USB box. If it does not work, initialize it or format it and try to clone it again. If it has been copied perfectly, turn off the computer, unplug the USB drive,  unmount the old hard drive (physically) and install the new SSD in the SATA or M.2 slot. Then, turn it on again. You will see that the boot will now be much faster.

It is necessary to block access to porn sites on a Windows PC, especially if the same computer is shared by our family members. In a previous article, I wrote about how to block websites on Android. The Internet is very vast to know all its traps, for some people it was devastating until it came to death.

You have to be very careful when you surf the internet that’s why I decided to write a tutorial on blocking access to porn sites on a Windows PC. On the internet we can find many kinds of dangers, human beings become monsters capable of hurting a child, but not only.

It is possible to browse the sites with material dedicated to adults, for this reason, it is always good to put filters between our computer and the network. They may come across content reserved for adults, such as: 007 and secret services; Snow White and the seven dogs; Broken little hood; The beauty and the Beast and so on

Below is the method to know how to block access to porn sites on a Windows PC. Finally, you will find DNS server addresses with which you can filter surfing on the internet with your computer.

Block access to porn sites on a Windows PC

Family Shield:

• Primary:  208.67.222.123
• Secondary:  208.67.220.123

Angel DNS: download  (Click on the application you just downloaded and choose the right DNS to safeguard your family)

Norton ConnectSafe

• Primary: 199.85.126.20
• Secondary: 199.85.127.20

1. Go to  Control Panel > Network and Internet> Network Share Center.

2. Click on Edit the tab settings on the left.

3. Double-click to open the active network connection (for example, “Local Area Connection”) and click Properties.

4. Select the ‘Internet Protocol version 4 (TCP / IPv4)’ and click on Properties.

5. Select “Use the following DNS server addresses” and type the new DNS Server IP addresses that you want to use for content filtering.

6. Type the following DNS addresses as in the picture:

Press OK and you are finished.

To record sound from your computer, you do not need to hold a microphone near the computer speakers to record audio. Even if you do not have the Stereo Mix option on your PC, you can easily record the sound coming from any Windows PC.

All this can be done with software. No, you do not even need to connect your computer’s audio output to its audio input with an audio cable to do this – although this may be an option.

How to record the sound coming from the computer

Option 1: Stereo Mix

Stereo Mix is ​​a special recording option that can only be provided by audio drivers. If you have this option, you can select it and force any application to record the same sound that the computer outputs from its speakers or headphones.

In modern versions of Windows, Stereo Mix is ​​generally disabled by default – even if the audio drivers support it. Follow our instructions to enable the Stereo Mix audio source on Windows. Use any audio-recorder program and select “Stereo Mix” as an input device instead of the usual “line-in” or “microphone” option.

On some devices, this option is not available. It has become increasingly less common.

Option 2: Audacity’s WASAPI Loopback

Do not you have the Stereo Mix option? No problem. Audacity has a useful feature that can record audio from the computer even without Stereo Mix. In fact, the Audacity feature can be even better than Stereo Mix – assuming you are willing to use Audacity to record audio, of course.

This software takes advantage of something that Microsoft has added in Windows Vista, and can also work on Windows 7, 8, 8.1 and 10. It helps to prevent the Stereo Mix option from missing on modern Windows PCs.

In Audacity, choose the “Windows WASAPI” audio host and then an appropriate loopback device – for example, “Speakers (loopback)” or “Headphones (loopback).”

Click the Record button to start recording audio in Audacity, and click Stop when you’re done. With Audacity, you can easily cut and edit the audio file when you’re done. Download Audacity.

Option 3: an audio cable

There is always the low-tech solution. Just have an audio cable with a 3.5 mm male connector at both ends. Connect one end to the line-out socket (or headphones) on the PC and the other to the line-in socket (or microphone) on the PC.

You can use any program for audio recording to record from “line in” or from the “microphone” input.

Of course, this is more inconvenient to use than the options above. But, if you desperately need to record audio from your computer with an application other than Audacity and you do not have Stereo Mix, the cable will allow you to do this.